Serving the Denton area  ·  (940) 293-2745  ·  Open Mon-Sun 7am-7pm
📞 (940) 293-2745 Free Quote

Metal Roofing in Pilot Point, TX (76258) · Local Professionals

Denton Metal Roofing · Fast response in Pilot Point and the Denton area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+289Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Pilot Point still feels like a small town, even with Denton growing toward it. The historic square and the older homes around it sit on big lots with mature pecans and live oaks, while just outside town the land opens into horse farms, barns, and ranchettes on that heavy Blackland clay. Those two worlds mean two very different roofing jobs, and we handle both.

Homeowners in 76258 call us because we know what fails here. On the old Victorians and Craftsman bungalows near the square, it is usually flashing and fastener issues on steep gables. On the farm shops and hay barns off FM 455, it is wind-lifted panels and screw fatigue. We are based in Denton, fully insured, and we treat Pilot Point like our own backyard.

Metal Roofing in Pilot Point (76258)

Pilot Point sits on the edge of the Cross Timbers, where the black clay gets deep and expansive. That soil moves with every wet and dry cycle, and it works on foundations, which in turn works on roof planes and flashing. On the older homes around the square, we often find flashing pulled loose at chimneys and valleys because the structure has shifted slightly over the decades. On the newer farm and ranch buildings, the challenge is different: wide open exposure to north and west winds, and metal panels that take the full brunt of spring storms with no tree line to break them. Access matters too. Some of these properties are on long gravel drives, and we plan deliveries and staging around that so we are not tearing up your pasture or blocking your gate.

Our team has worked across Denton County for years, from the historic districts in Denton to the horse properties out toward Ponder and Sanger. In Pilot Point we have learned to match the material to the building. Copper and specialty metal for the historic homes near the square, where the look matters as much as the weather protection. Standing seam and stone-coated steel for the lake-country places that need to shrug off hail. And honest repair work for the barns and shops that just need to stay dry.

Our services in Pilot Point

How a Job Works in Pilot Point

Step 1: You call us at (940) 293-2745 or request a free estimate online. We schedule a time to walk the roof and the property with you, not just take photos from the ground. We look at the decking, the flashing, the fasteners, and how water is actually draining. If it is a historic home near the square, we also talk through what the city and any design review will expect before we recommend a panel profile or color.

Step 2: Once you approve the scope and price, we pull the permit through the City of Pilot Point building department and schedule the work. On tight lots near the square, we stage materials in the driveway and keep the street clear. On farm properties, we coordinate around gates and livestock. Most residential re-roofs take a few days depending on weather and complexity. We keep you posted on the schedule and do not leave your roof open overnight if we can avoid it.

Step 3: Cleanup is part of the job, not an afterthought. We magnet-sweep for nails, haul off old materials, and walk the property with you at the end. You see the finished work, we confirm the flashing and drainage are right, and you get the paperwork you need for your records or your insurance claim.

Pricing in Pilot Point depends on the same things it does everywhere: square footage, roof pitch, how many layers are coming off, access, and condition. As a ballpark, metal roof installation starts around $8 per square foot, standing seam around $10, metal roof replacement around $9, and a retrofit over existing shingles around $7. Repairs and leak calls start around $450, screw replacement and re-fastening around $750, and flashing or chimney work around $600. Coating and painting starts around $2.50 per square foot, and gutters for metal roofs start around $9 per linear foot. On the historic homes near the square, copper and specialty metal runs higher, starting around $20 per square foot, because the material and the detailing take more time. We give free estimates and free inspections, so call (940) 293-2745 and we will give you a real number for your property, not a phone guess.

My 1920s bungalow near the Pilot Point square has a steep gable and the flashing at the chimney keeps pulling loose. What is causing that?
On these older homes, the black clay under the foundation moves seasonally, and that movement transfers up through the framing. The chimney is usually the stiffest point, so the flashing takes the stress and eventually separates. We see it on a lot of the Victorians and Craftsman homes around the square. The fix is usually to redo the flashing with a proper counterflashing detail that allows for some movement, not just caulk over the gap.
A spring storm just peeled back panels on my barn off FM 455. How fast can you get out to Pilot Point?
We prioritize active leaks and storm damage. Call (940) 293-2745 and we will schedule an inspection, often same day or next day depending on the weather and our route. We can tarp or secure the area to stop further water intrusion while we put together the repair scope and any insurance documentation you need.
What does a metal roof replacement cost on a typical three-bedroom ranch house in Pilot Point?
For a single-story ranch in the 1,500 to 2,000 square foot range, most metal roof replacements land somewhere between $12,000 and $20,000 depending on the panel type, pitch, and whether we are removing old shingles. Standing seam is at the higher end, corrugated and ribbed panels at the lower end. We give free estimates so you get a real number for your roof, not a range.
Do I need a permit from the City of Pilot Point to replace my roof?
In most cases, yes. A full replacement or re-roof typically requires a permit, and the city inspects the work. Fees and requirements can vary, and if your home is in a historic area near the square there may be additional design review. We handle the permit process for you and make sure the work meets current code, including limits on how many layers you can recover over.
My neighbor says my new metal roof panels overhang the property line. What do I do?
Property line issues come up on tighter lots near the square. Before we install, we check the survey and set the roof edge so it stays within your property. If there is an HOA, we also submit the panel profile and color for approval first. If a neighbor raises a concern after the fact, we will come out and look at the survey with you and adjust if needed.
Are you insured for work on my Pilot Point property?
Yes. We carry general liability insurance and workers' compensation coverage.
What should I do to maintain my metal roof in Pilot Point between storms?
Check the fasteners and seals once a year, especially after hail season. On the farm buildings, look for backed-out screws and worn washers. On homes under pecans and live oaks, keep the valleys and gutters clear of leaves so water does not dam up. We offer inspections and screw replacement, and a coating every several years helps with the UV and summer sun.
Why choose us?

Trusted professionals in Denton

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Denton

All your work handled by qualified professionals in Denton

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

289+ Verified Client Reviews in Denton

⭐⭐⭐⭐⭐ 4.9/5 · 289 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Denton · Response within 24h · No commitment · ☎ (940) 293-2745

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Denton ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm