Licensed & Insured, in Denton and surrounding areas. Metal Roof Installation · Standing Seam Metal Roofing · Metal Roof Replacement.
Your Free Quote Request
All your work handled by qualified professionals in Denton
Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.
Included in your service
Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.
Included in your service
Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.
Included in your service
Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.
Included in your service
Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.
Included in your service
Priority leak response: we trace the leak to its real source instead of caulking the symptom.
Included in your service
The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.
Included in your service
Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.
Included in your service
The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.
Included in your service
Steel strength under a textured stone finish, with strong hail and wind performance.
Included in your service
Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.
Included in your service
Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.
Included in your service
Flashing is the number one leak point on any metal roof, and it is what we fabricate best.
Included in your service
Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.
Included in your service
Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.
Included in your service
A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.
Included in your service
Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.
Included in your service
Barns, workshops, churches, and light commercial metal roofing across the county.
Included in your service
Reach us by phone at (940) 293-2745 or fill out the estimate form. We get back to you within 24 hours, no commitment required.
Our Metal Roofing Contractor visits your property, evaluates the project, and provides a written quote before any work begins.
Our crew completes the metal roofing and leaves your property clean and tidy. Full cleanup is included.
Continuous training, professional equipment, meticulous and code-compliant work
Full coverage on all our job sites, no exceptions
Emergencies, weekends, holidays: available when you need us
Response within 24h, no commitment, by phone or form
Available Mon-Sun 7am-7pm
We serve in Denton and surrounding areas · On-site visits included · Free estimate within 24h
Denton Metal Roofing is a team of local certified professionals based in Denton. We respond quickly in Denton and surrounding areas with professional equipment suited to every job.
Free estimate, transparent pricing, no subcontracting. Tell us about your roof. We'll handle the rest.
📞 Call (940) 293-2745⭐⭐⭐⭐⭐ 4.9/5 · 289 verified Google reviews
“We had them put a metal roof on our detached garage/workshop out back, about 900 square feet of standing seam. Crew of three knocked it out in two days and the cleanup was honestly better than before they started. I keep walking out there just to look at it.”
Metal Roof Installation
“Got copper gutters installed on our house to go with the metal roof, and the seams and hangers are beautiful work. Only thing is it took a couple weeks longer than the estimate, but they kept me posted the whole time and the result was worth it.”
Gutters for Metal Roofs
“Our old barn roof was rusted through in spots and I figured we'd have to tear it all off. They did a metal roof over the existing shingles instead, way less mess, way less money, and the hay stays dry now. Should've called them years ago.”
Commercial & Agricultural Metal Roofing
“Standing seam in a dark bronze finish on our 2,400 sq ft house. The crew was respectful, showed up when they said they would, and the panels line up perfectly. Neighbors have already asked for their number twice.”
Standing Seam Metal Roofing
“Had a leak over the kitchen every time it rained hard. They found it was a failed flashing around the chimney, fixed that and re-sealed some screws while they were up there. Two storms since and not a drop.”
Metal Roof Leak Repair
“They replaced our old failing roof with corrugated metal panels and the difference is night and day, house is quieter in the rain and way cooler upstairs. I was nervous about the cost but they walked me through every option first.”
Metal Roof Replacement
“A bunch of screws had backed out on our metal roof and it was starting to rattle in the wind. They replaced the bad ones with the proper washered screws and checked the whole thing over. Quick, fair price, no upsell.”
Screw Replacement & Re-Fastening
“Booked an inspection before buying a house with a stone-coated steel roof, and they gave me a straight answer instead of a sales pitch, even pointed out a couple of flashing spots to watch. Honest folks, and I'll be using them for the repair work.”
Metal Roof InspectionReal photos of our work in Denton · Each image shows the final result achieved for our clients
Indicative estimates: your free personalized quote is always exact
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Exposed fastener metal roof installation | Starting at $8/sq ft | Corrugated or ribbed panels, underlayment, trim, and standard flashing included, price rises with pitch and tear-off. |
| Standing seam metal roof installation | Starting at $12/sq ft | Concealed fasteners, raised seams, premium underlayment, price rises with gauge, finish, and roof complexity. |
| Metal shingle or stone-coated steel installation | Starting at $14/sq ft | Stamped or granular steel systems for historic and HOA homes, price rises with profile and color selection. |
| Retrofit over existing shingles | On estimate | Requires a deck and framing check plus local code review of existing layers before a number is given. |
| Travel | Included | in Denton and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (940) 293-2745, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Standing seam installation, standard pitch | Starting at $10/sq ft | Includes tear-off of one shingle layer, underlayment, panels, and standard flashing. |
| Standing seam on steep or complex roof | Starting at $13/sq ft | Adds labor for steep gables, multiple valleys, and tall chimneys common near the square. |
| Standing seam over existing shingles (retrofit) | On estimate | Needs an on-site deck check and confirmation that code allows the added layer. |
| Large barn, shop, or agricultural building | On estimate | Priced by square footage, panel length, and access for lifts on rural Denton County sites. |
| Travel | Included | In Denton and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (940) 293-2745, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Exposed fastener panel replacement | Starting at $9/sq ft | Full tear-off, deck inspection, underlayment, and corrugated or ribbed panels with screws. |
| Standing seam replacement | Starting at $13/sq ft | Concealed fasteners and raised seams; price rises with roof pitch, valleys, and panel gauge. |
| Stone-coated steel or metal shingle replacement | Starting at $12/sq ft | Impact-rated system with full tear-off; steeper roofs and complex flashing push the rate up. |
| Complex or large-scale job | On estimate | Steep Victorian gables, multiple valleys, historic review, or extensive deck repair need an on-site look. |
| Travel | Included | In Denton and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (940) 293-2745, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Retrofit over existing shingles (single-story ranch) | Starting at $7/sq ft | Includes underlayment, trim, fasteners and flashing work on a simple gable roof |
| Standing seam or stone-coated steel retrofit | Starting at $9/sq ft | Premium panel systems cost more, especially on steep or cut-up roofs |
| Complex or large-scale job | On estimate | Multiple valleys, dormers, skylights or a possible tear-off need an on-site look |
| Travel | Included | In Denton and surrounding areas, no separate call-out or mileage fee |
| Estimate | Free | Response within 24h at (940) 293-2745, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Minor repair (screws, sealant, pipe boot) | Starting at $450 | Includes resealing penetrations and replacing failed fasteners; roof pitch and access move the price. |
| Panel replacement (single panel) | Starting at $750 | Includes matching profile panel, fasteners, and reseal; panel type and color match affect cost. |
| Flashing rebuild (chimney or skylight) | Starting at $950 | Includes removing failed flashing and rebuilding the seal; steep pitch and height add labor. |
| Storm damage repair (multiple areas) | On estimate | Needs an on-site look to scope all damaged panels, fasteners, and flashing before pricing. |
| Travel | Included | In Denton and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (940) 293-2745, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Targeted leak diagnosis and repair | Starting at $450 | Includes attic inspection, water test, and one simple fix like fastener or seam repair |
| Flashing and penetration repair | Starting at $650 | Covers chimney, skylight, or pipe boot flashing rebuild with new metal and sealant |
| Panel or section replacement | Starting at $900 | For hail-punctured or rusted panels, includes matching panel and new underlayment |
| Emergency tarping after storm | Starting at $350 | Priority response, reinforced tarp secured until permanent repair can be scheduled |
| Complex or multi-point leak | On estimate | Multiple entry points or hidden damage need an on-site look before pricing |
| Travel | Included | In Denton and surrounding areas, no separate call-out or mileage fee |
| Estimate | Free | Response within 24 hours at (940) 293-2745, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Partial re-fastening (single slope or section) | Starting at $750 | Covers pulling and replacing backed-out screws with fresh UV-rated washers on one roof section, plus a seal check at nearby penetrations. |
| Full roof re-fastening | Starting at $1,450 | Replaces every failing fastener and washer across the roof, with torque-set installation and a water test on the repaired runs. |
| Metal-over-shingle retrofit re-fastening | Starting at $1,850 | Uses longer fasteners driven into purlins or trusses below the old shingle layer, and replaces missing closure strips at eaves and ridges. |
| Commercial or agricultural re-fastening | On estimate | Barns, shops, and commercial roofs need an on-site look at panel count, access, and substrate before we quote a number. |
| Travel | Included | In Denton and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (940) 293-2745, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Corrugated panel roof (26 or 29 gauge) | Starting at $5.50/sq ft | Includes panels, trim, fasteners and closures; gauge, pitch and tear-off move the price. |
| R-panel or 5V ribbed roof | Starting at $6.25/sq ft | Wider coverage and stronger wind uplift; roof height and flashing detail affect the rate. |
| Retrofit over existing shingles | Starting at $6.75/sq ft | Panels on purlins over sound shingles; code layer limits and deck condition apply. |
| Tear-off and new install | On estimate | Full removal, deck inspection and repair priced after an on-site look at layers and condition. |
| Screw replacement and re-fastening | Starting at $1.10/sq ft | Replacement screws and washers on existing panels; backed-out or crushed fasteners priced by count. |
| Travel | Included | In Denton and surrounding areas, no separate call-out or mileage fee. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Metal shingle roof, standard gable | Starting at $9/sq ft | Includes tear-off, synthetic underlayment, new flashing, and standard shingle profile installation |
| Slate or shake profile upgrade | Starting at $12/sq ft | Premium stamped profile with textured finish, priced higher for material and layout complexity |
| Complex or steep-pitch roof | On estimate | Multiple gables, dormers, or steep pitches need an on-site look before pricing |
| Deck repair and flashing rebuild | On estimate | Rotten sheathing or rusted flashing found during tear-off is quoted after inspection |
| Travel | Included | in Denton and surrounding areas, no separate call-out or mileage fee |
| Estimate | Free | Response within 24h at (940) 293-2745, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Stone-coated steel, standard profile | Starting at $9/sq ft | Includes tear-off of one shingle layer, underlayment, and standard flashing details. |
| Shake-look or tile-look premium profile | Starting at $12/sq ft | Higher panel cost and more layout time on steep gables and dormers. |
| Retrofit over existing shingles | Starting at $8/sq ft | Skips tear-off where code allows, but deck condition must be verified first. |
| Two-story or complex roof | On estimate | Staging, safety, and detail work on dormers and multiple valleys need an on-site look. |
| Travel | Included | In Denton and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (940) 293-2745, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Copper porch or accent roof | Starting at $20/sq ft | Includes soldered copper panels and custom flashing; roof size and detail count move the price. |
| Zinc or aluminum accent roofing | Starting at $18/sq ft | Includes formed panels and flashing for bay windows and dormers; access and pitch affect the rate. |
| Full architectural copper roof | On estimate | Whole-house copper or zinc needs an on-site look at roofline, valleys and deck condition. |
| Custom copper flashing and chimney caps | On estimate | Shop-formed soldered details priced by linear foot and complexity of the penetration. |
| Travel | Included | In Denton and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (940) 293-2745, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Spot repair and recoat | Starting at $2.50/sq ft | Covers wash, rust treatment and coating on problem areas, with rust severity driving the price up |
| Full acrylic reflective coating | Starting at $3.25/sq ft | Includes pressure wash, rust converter, primer and full topcoat, with roof pitch and height affecting cost |
| Urethane coating system | Starting at $4.50/sq ft | Higher-durability coating for standing seam and metal shingle roofs, priced by square footage and access |
| Barn, shop or agricultural building | On estimate | Large roof area, fastener count and equipment access require an on-site look before quoting |
| Travel | Included | In Denton and surrounding areas, no separate call-out or mileage fee |
| Estimate | Free | Response within 24h at (940) 293-2745, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Single penetration flashing repair | Starting at $600 | Includes inspection, removal of failed flashing and one custom-bent detail, with access and height affecting price. |
| Chimney counterflashing and reglet | Starting at $850 | Covers reglet cut, new counterflashing and urethane seal, with masonry condition and roof pitch moving the number. |
| Skylight curb rebuild | Starting at $1,100 | Includes curb repair, new seal and flashing reset, with skylight count and deck condition as the main cost factors. |
| Valley metal replacement | On estimate | Valley length, debris load and panel type require an on-site look before a firm number is given. |
| Travel | Included | In Denton and surrounding areas, no separate call-out or mileage fee is added to the repair. |
| Estimate | Free | Response within 24 hours at (940) 293-2745, with no obligation to book the repair. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Single-story roof, basic guard run | Starting at $1,200 | Covers one to two guard rows over a main walkway or driveway, including layout and sealed fasteners. |
| Two-story or steep-pitch roof | Starting at $1,900 | Higher roof height and pitch add labor, plus more guard rows to protect walkways and entries. |
| Barn, shop, or long panel run | Starting at $2,600 | Long ribbed or corrugated panel runs need more screw-mounted pads and extra layout time across the roof. |
| Eave reinforcement and ice stop | Starting at $850 | Heavier drip edge and extra fastening at eave and rake, quoted with or without guard installation. |
| Complex or large-scale job | On estimate | Multiple roof sections, mixed panel types, or repair work found during inspection need an on-site look first. |
| Travel and estimate | Included / Free | No mileage fee in Denton and nearby towns, and the written estimate carries no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Storm damage inspection and documentation | Free | Full roof and attic check with raking-light photos and a written repair versus replacement scope |
| Screw replacement and re-fastening | Starting at $450 | Priced by roof size and how many fasteners backed out along windward eaves and ridges |
| Targeted panel and flashing repair | Starting at $650 | Covers damaged panel replacement and rebuilt flashing; steep gables and chimney work push it higher |
| Partial slope replacement | On estimate | Needs an on-site look because tie-in flashing and panel matching drive the scope |
| Travel | Included | in Denton and surrounding Denton County areas, no separate call-out or mileage fee |
| Estimate | Free | Response within 24 hours at (940) 293-2745, no obligation to book the work |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Standard residential inspection | Free estimate | Walk-over inspection with written report and photos, price confirmed on site. |
| Two-story or steep-pitch home | Starting at $150 | Includes ladder and harness access, plus full report, price moves with pitch and access. |
| Insurance claim or pre-purchase report | Starting at $200 | Detailed photo documentation and written findings for adjusters or buyers, scope confirmed on site. |
| Commercial or agricultural building | On estimate | Large roof area, height and access require an on-site look before pricing. |
| Travel | Included | in Denton and surrounding areas, no separate call-out or mileage fee |
| Estimate | Free | Response within 24h at (940) 293-2745, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Seamless aluminum gutter, standard run | Starting at $9/linear ft | Includes hangers, outlets, and downspouts on an accessible single-story metal roof. |
| Standing seam with seam-clamp hangers | Starting at $13/linear ft | No panel penetration, tighter spacing, and sealed outlets for steep standing seam roofs. |
| Leaf guard installation | Starting at $6/linear ft | Fine stainless mesh sized for pecan, live oak, and cedar elm debris on Denton lots. |
| Two-story or steep-gable access | On estimate | Ladder staging, steep pitch, and historic trim need an on-site look before pricing. |
| Travel | Included | In Denton and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (940) 293-2745, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Barn or shop roof inspection | Free estimate | On-site inspection of panels, fasteners, purlins, and flashings with a written scope. |
| Screw replacement and re-fastening | Starting at $1,200 | Covers washer and screw renewal on a typical ag building, priced by panel count and access. |
| Exposed-fastener panel installation | Starting at $3.50 per sq ft | Includes panels, fasteners, closures, and standard flashings; gauge and span move the price. |
| Standing seam commercial installation | On estimate | Concealed-fastener systems need an on-site look at span, pitch, and substrate before quoting. |
| Metal over existing shingles (retrofit) | On estimate | Code limits on existing layers and deck condition determine scope and cost. |
| Travel | Included | in Denton and surrounding areas, no separate call-out or mileage fee. |
Indicative rates, actual cost varies with project size, materials, and site access. Free personalized estimate within 24h.
Homeowners searching for a metal roofing contractor near me in Denton want straight answers, not a sales pitch. Denton Metal Roofing is a network of licensed, insured local contractors who install, replace, re-roof, and repair metal systems across Denton, Lewisville, Flower Mound, Corinth, Lake Dallas, and the surrounding communities. We work on steep gables, low-slope ranches, and horse barns alike, matching the system to the structure instead of forcing one product onto every roof.
Our region brings hail, high wind, intense UV, and clay soil that shifts under foundations and decks. We also see a large stock of 15 to 30 year old screw-down roofs whose fasteners are due for service. Whether you need a Metal Roof Installation or a targeted repair, we inspect first and recommend the honest path forward.
Most metal roof leaks in Denton trace to a handful of causes. On 15 to 30 year old exposed-fastener roofs, the number one culprit is fasteners backing out as EPDM sealing washers dry, shrink, and crack. Once the washer fails, water reaches the screw shank and the hole enlarges. Seam separation from thermal movement opens panels that were once tight. Failed pipe boots and flashing at chimneys, skylights, and valleys let water slip behind the metal. Wind-lifted panels after a spring storm, and punctures from fallen pecan or oak limbs, round out the list.
Ignoring a small leak is expensive. Water tracks along purlins and decking far from the entry point, so by the time a stain shows on the ceiling, rotted sheathing and saturated insulation are often already there. A full Screw Replacement & Re-Fastening with new washered fasteners often restores a watertight roof for a fraction of replacement cost. When the deck is sound and the panels are tight, repair is the right call. When rust-through, widespread seam failure, or storm damage has compromised the system, we say so plainly.
If you have an active leak, call (940) 293-2745 and we will inspect, document, and explain your options. For targeted leaks, see our Metal Roof Leak Repair service, or request a free estimate to get started.
We install the systems that fit North Texas homes: Standing Seam Metal Roofing with concealed clips and no exposed fasteners, Corrugated & Ribbed Panel Roofing as the economical workhorse for barns, shops, and cabins, plus Metal Shingle Roofing, Stone-Coated Steel Roofing, and Copper & Specialty Metal Roofing for accents and historic profiles.
The honest comparison: standing seam costs more up front and has no exposed screws to maintain, while screw-down costs less and needs fasteners serviced over its life. When the deck is sound, Metal Roof Over Shingles (Retrofit) is a legitimate option; when it is not, tear-off is the right call. We match the system to the home, not the other way around.
Metal roof installation is typically quoted per square foot, while repairs are often flat-rate. Price depends on the panel system and metal gauge, roof pitch and complexity, tear-off versus recover, decking condition, and access. We frame all figures as typical ranges only; final pricing depends on the roof and site conditions. Some carriers may offer premium discounts for metal or impact-rated roofs, but that is between you and your insurer.
For a clearer picture, see our pricing page, then request a free estimate or free roof inspection so we can quote your actual roof.
After a storm, we inspect and provide written documentation with photos that you may submit to your own insurer. We are not an insurance adjuster or agent, coverage decisions rest with the carrier, and we make no promise a claim will be approved. On permits: in most jurisdictions a permit is commonly required for a full replacement, but requirements vary by city. Historic district or HOA design review can also affect panel profile and color choices.
Requirements vary. Always verify with the Denton building or planning department before starting your project. To schedule an inspection or ask a question, contact us.
Ready to get started? Denton Metal Roofing serves in Denton and surrounding areas. Get your free, no-obligation estimate today.
Get a Free EstimateMetal Roofing in Denton · Response within 24h · No commitment · ☎ (940) 293-2745
Your Free Quote Request