Serving the Denton area  ·  (940) 293-2745  ·  Open Mon-Sun 7am-7pm
📞 (940) 293-2745 Free Quote

Metal Roofing in Justin, TX (76247) · Local Professionals

Denton Metal Roofing · Fast response in Justin and the Denton area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+289Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Justin, Texas, is a small town with a big rural streak, where horse properties and ranchettes sit off FM 156 and Highway 114, and the rooftops take a beating from hail, wind, and that relentless North Texas sun. If you live out here in 76247, you know the drill: one spring storm can peel back a shingle roof or rattle loose every fastener on an old barn.

That's why homeowners and property managers around Justin call Denton Metal Roofing. We're based just down the road in Denton, and we've worked on everything from brick ranches near Justin Elementary to metal shops and barns out on the county roads. When your roof needs attention, we give it to you straight and get it done right.

Metal Roofing in Justin (76247)

Justin sits on the Blackland Prairie, and that means expansive black clay soil that shifts with every wet and dry spell. On larger lots and horse properties, that movement can affect the way a roof settles and how flashings hold up over time. Add in the open prairie wind that sweeps across FM 156 and the frequent spring hailstorms, and you've got a climate that punishes roofs. We see a lot of wind-lifted panels, failed fasteners, and leaks around chimneys and skylights. Older homes closer to downtown Justin often have steep gables and smaller lots, while the newer subdivisions off Highway 114 have two-story brick-and-stone homes with low-pitch roofs. Out west toward Ponder and the county line, it's all barns, shops, and ranchettes where corrugated and ribbed panel roofing makes the most sense.

Our team has been serving Justin and the surrounding Denton County area for years. We know the local building stock, the soil, and the weather patterns, and we use that knowledge to recommend the right metal roofing system for your property, whether it's a standing seam roof on a custom home or a simple repair on a hay barn.

Our services in Justin

How a Job Works in Justin

Step 1: You call us at (940) 293-2745 or fill out our contact form. We'll set up a free on-site assessment at your Justin property, usually within a few days. We inspect your roof, take measurements, and talk through your options. You'll get a written estimate before any work begins.

Step 2: Once you approve the estimate, we schedule the work. For most residential jobs in Justin, that means a crew arriving early, protecting your landscaping, and getting after it. If you're in an HOA, we'll help you get the paperwork together. And if your project needs a permit from the City of Justin, we'll handle that process and make sure the work meets local code.

Step 3: When we're done, we clean up. That means a magnet sweep for nails, a walkthrough of the finished roof, and a chance for you to ask questions. We don't leave until you're satisfied.

Pricing for metal roofing in Justin depends on the size and complexity of your roof, the material you choose, and how accessible the property is. For a typical single-family home, metal roof installation starts at $8 per square foot, standing seam starts at $10 per square foot, and a full replacement starts at $9 per square foot. If you're retrofitting over existing shingles, that starts at $7 per square foot. Smaller jobs like a metal roof repair or leak repair start at $450, and screw replacement and re-fastening starts at $750. For agricultural buildings and shops, corrugated and ribbed panel roofing starts at $5.50 per square foot. We always provide a free estimate so you know exactly what you're paying for. Call (940) 293-2745 to schedule yours.

My horse barn off FM 156 has a corrugated metal roof that's starting to leak at the fasteners. Can you repair it without replacing the whole roof?
Yes, we can often repair corrugated and ribbed panel roofs by replacing the failed fasteners and sealing the penetrations. If the panels themselves are still in good shape, a screw replacement and re-fastening job starting at $750 can add years to the roof. We'll inspect the barn and give you an honest assessment.
A storm just blew through Justin and lifted some panels on my roof. How quickly can you get out to inspect the damage?
We offer free storm and wind damage inspections in Justin. Call us at (940) 293-2745 and we'll schedule a visit as soon as possible, usually within a day or two depending on demand. We'll document the damage for your insurance claim and provide a repair estimate.
What's the typical cost for a metal roof replacement on a 2,000-square-foot home in Justin?
For a 2,000-square-foot home, a metal roof replacement typically starts around $9 per square foot, so you're looking at roughly $18,000 and up depending on the material and roof complexity. Standing seam or stone-coated steel will be higher. We provide a free estimate so you can see the exact numbers for your property.
Do I need a permit from the City of Justin to replace my roof?
Yes, the City of Justin typically requires a permit for a full roof replacement. Requirements can vary, so we always check with the local building department before starting work. We handle the permitting process for you and make sure the job meets current code.
My HOA has rules about roof colors and materials. Can you help me get approval for a metal roof?
Absolutely. We can provide product samples and documentation to submit to your HOA. Many HOAs in Justin approve standing seam and stone-coated steel roofs because they look clean and come in neutral colors. We'll work with you to choose an option that meets the rules.
Are you fully insured for roofing work in Justin?
Yes, we carry general liability insurance and workers' compensation coverage. We're happy to provide a certificate of insurance upon request so you can verify our coverage before work begins.
What maintenance does a metal roof need in Justin's climate?
In Justin, metal roofs should be inspected annually, especially after hail season. Check for loose fasteners, debris in valleys, and worn sealant around flashings. We recommend a professional inspection every few years to catch small issues before they become leaks. Keeping gutters clear and trimming overhanging branches also helps.
Why choose us?

Trusted professionals in Denton

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Denton

All your work handled by qualified professionals in Denton

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

289+ Verified Client Reviews in Denton

⭐⭐⭐⭐⭐ 4.9/5 · 289 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Denton · Response within 24h · No commitment · ☎ (940) 293-2745

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Denton ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm