Serving the Denton area  ·  (940) 293-2745  ·  Open Mon-Sun 7am-7pm
📞 (940) 293-2745 Free Quote

Metal Roofing in Denton, TX (76201) · Local Professionals

Denton Metal Roofing · Fast response in Denton and the Denton area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+289Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Denton roofs take a beating. Between the hail that rolls through North Texas each spring and the white-hot summer sun over the Blackland Prairie, the shingle roofs on those 1960s brick ranches near the university and the steep gables on Victorian homes around the courthouse square get worn down fast. We see it on every street from Oak-Hickory to Southridge.

That is why homeowners in 76201 call Denton Metal Roofing. We install, repair, and replace metal roofs built to handle Denton County weather, from the two-story brick-and-stone homes in Mayhill to the horse barns out toward Ponder and Sanger. Our crews are fully insured, and we know what hail alley does to a roof because we work here every week.

Metal Roofing in Denton (76201)

Denton sits on expansive black clay soil that swells and shifts with every wet and dry cycle, and that movement shows up in roof decks, flashing, and fasteners. The older Victorians and Craftsman homes near Bell Avenue have steep gables and tight lots with mature post oaks and pecans hanging over the roofline, so access and fall protection take planning. The 1920s to 1950s brick bungalows around Evers Park and Denia often have low-pitch roofs that need careful panel layout and ventilation. Out in Ponder, Sanger, Krum, and Pilot Point, we work on barns, shops, and ranchettes where wind uplift and hail impact are the main concerns. Lake Lewisville to the south adds humidity and storm-driven rain, and winter ice storms can dam up at the eaves on taller homes. Our crews handle all of it, from standing seam and stone-coated steel to corrugated panel and metal shingle systems.

We have been serving Denton and the surrounding communities long enough to know which neighborhoods need historic review, which HOAs want a specific panel profile, and which jurisdictions want an inspection before final sign-off. When you need a straight answer about what your roof needs, we give it.

Our services in Denton

How a Job Works in Denton

Step 1: You call (940) 293-2745 or request a free estimate online. We schedule an on-site assessment, inspect the roof and attic, check flashing and fasteners, and talk through options. You get a written scope and a clear price before any work starts.

Step 2: We handle the work. On tight lots near the courthouse square, we plan material staging and dumpster placement so we do not block alleys or neighbors. If your home is in a historic district or an HOA, we coordinate the design review and panel color approval. We pull the required roofing permit through the City of Denton website or the applicable jurisdiction before we tear off, and we keep the job site secure each day.

Step 3: Cleanup and final walkthrough. We magnet-sweep the yard, haul away old shingles and metal scrap, and walk the finished roof with you. We leave your property clean and show you exactly what was done.

Pricing in Denton depends on roof size, pitch, access, existing layers, and whether we are repairing or replacing. As a ballpark, metal roof installation starts at $8 per square foot, standing seam at $10, metal roof replacement at $9, and a retrofit over existing shingles at $7. Corrugated and ribbed panel starts at $5.50, metal shingle and stone-coated steel at $9, and copper or specialty metal at $20. Repairs and leak repairs start at $450, screw replacement and re-fastening at $750, flashing and chimney or skylight repair at $600, and coating or painting at $2.50 per square foot. Storm and wind damage inspections are free. Every roof is different, so call (940) 293-2745 for a free estimate and a realistic number for your home.

My 1950s brick ranch near Southridge has a low-pitch roof. Can metal roofing work on it?
Yes. Low-slope roofs are common in Southridge and the university area, and we use standing seam or ribbed panels with the right underlayment and seam spacing to handle them. We check the deck and ventilation first, because those older homes often need a little prep before panels go on.
A storm just peeled back panels on my roof in Denton. How fast can you get out?
We prioritize active leaks and storm damage. Call (940) 293-2745 and we will schedule a free inspection, usually within a day or two depending on storm volume. We can tarp or secure the area to prevent further water intrusion while you file your insurance claim.
What does a typical metal roof replacement cost in Denton?
Most replacements fall between the starting rates we list: $9 per square foot for replacement, $10 for standing seam, and $8 for standard installation. The final price depends on square footage, roof complexity, how many old layers need removal, and whether historic or HOA review is required. We give you a written estimate before work begins.
Do I need a permit for a metal roof in Denton?
Roofing permits are commonly required for full replacements and re-roofs, and requirements vary by jurisdiction. We verify the rules with the local building department before starting. You can also check the City of Denton website for general information, but we handle the permit process for you.
My HOA requires approval for a metal roof. Can you help with that?
Yes. Many Denton-area HOAs and historic districts restrict panel profile and color. We provide product samples, spec sheets, and color chips for your application, and we coordinate with the review board so the installation meets the rules.
Are you insured for work on my Denton property?
We are fully insured with general liability and workers' compensation coverage.
What maintenance does a metal roof need in Denton's climate?
Check fasteners and seals after hail season, clear debris from valleys and gutters, and inspect flashing around chimneys and skylights. The intense UV and clay soil movement can loosen things over time. We offer inspections and tune-ups, and fixing a small issue early is far cheaper than a leak repair.
Why choose us?

Trusted professionals in Denton

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Denton

All your work handled by qualified professionals in Denton

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

289+ Verified Client Reviews in Denton

⭐⭐⭐⭐⭐ 4.9/5 · 289 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Denton · Response within 24h · No commitment · ☎ (940) 293-2745

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Denton ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm