Serving the Denton area  ·  (940) 293-2745  ·  Open Mon-Sun 7am-7pm
📞 (940) 293-2745 Free Quote

Metal Roofing in Flower Mound, TX (75022) · Local Professionals

Denton Metal Roofing · Fast response in Flower Mound and the Denton area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+289Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Flower Mound is full of big two-story brick-and-stone homes on generous lots, and those roofs take a beating from North Texas hail and wind. If you live off FM 407 near Parker Square or out toward Lake Grapevine, you already know the drill: one spring storm can turn a quiet neighborhood into a parade of roofing trucks.

We are Denton Metal Roofing, and we have been putting metal roofs on Flower Mound homes in 75022 for years. We know the HOA rules, the permit process, and the way the black clay soil shifts under your foundation. Call (940) 293-2745 and we will give you a straight answer.

Metal Roofing in Flower Mound (75022)

Flower Mound sits on the edge of the Blackland Prairie, and the soil here is expansive black clay that moves with every wet and dry cycle. That movement stresses roof decks and flashing, especially on the large two-story homes common in neighborhoods like Wellington, Bridlewood, and the Lakeside area. Many of these houses have steep gables and complex rooflines with multiple valleys, which means wind-driven rain finds every weak point. We also see a lot of acreage properties with outbuildings and shops, where standing seam and stone-coated steel make sense because they shed hail and hold up to UV.

Our team has worked on everything from 1980s subdivision homes near Flower Mound High School to newer custom builds off Gerault Road. We know how to coordinate with HOAs, pull the right permits from the Town of Flower Mound, and schedule work around the spring storm season. When we install a metal roof here, we build it for the hail and wind this city actually gets, not for a brochure.

Our services in Flower Mound

How a Job Works in Flower Mound

Step 1: You call (940) 293-2745 or request a free estimate online. We schedule an on-site assessment, usually within a few days. We inspect your roof, check the decking and flashing, and talk through options like standing seam, stone-coated steel, or a retrofit over your existing shingles. You get a written estimate with no pressure.

Step 2: Once you approve, we handle the permit with the Town of Flower Mound and coordinate any HOA design review. On tight lots in neighborhoods like Timber Creek, we plan material delivery and staging carefully so we do not block driveways or damage landscaping. Most residential metal roofs take three to seven days depending on size and complexity.

Step 3: We clean up every day, and when the job is done we walk the property with you. We magnet-sweep for nails, haul away old materials, and make sure gutters and downspouts are clear. You get a final walkthrough and a written warranty before we leave.

Metal roofing in Flower Mound is priced by the square foot, and the ballpark numbers are straightforward. Corrugated and ribbed panel roofing starts around $5.50 per square foot, metal roof installation starts at $8, standing seam starts at $10, and stone-coated steel starts at $9. A metal roof over shingles (retrofit) starts at $7 per square foot. Repairs and leak fixes start at $450, screw replacement and re-fastening at $750, and flashing or chimney repair at $600. Snow guards and ice protection start at $1,200, and gutters for metal roofs run about $9 per linear foot.

The final price depends on roof size, pitch, access, the condition of your decking, and how quickly you need it done. We give free estimates and never surprise you with add-ons. Call (940) 293-2745 to get a real number for your Flower Mound home.

My house in Wellington has a steep roof with multiple valleys. Is standing seam a good fit for that kind of roofline?
Yes. Standing seam is actually ideal for complex rooflines because the panels are custom-cut to length and the concealed fasteners mean fewer penetrations. On steep gables, we use specialized harnesses and staging to work safely. The hidden fasteners also handle the thermal movement from our hot summers without backing out, which is a common problem with exposed screws on older metal roofs.
A storm just knocked limbs onto my roof off FM 407. How fast can you get out for an emergency inspection?
We prioritize storm damage calls in Flower Mound and can usually get an inspector out within 24 to 48 hours after a major event. Call (940) 293-2745 and describe the damage. We will tarp active leaks if needed and document everything for your insurance claim. We never promise coverage, but we do provide the photos and written reports your adjuster will ask for.
What does a typical metal roof replacement cost for a two-story home in Flower Mound?
For a typical 2,500 to 3,500 square foot two-story home, most metal roof replacements run between $18,000 and $35,000 depending on the material. Stone-coated steel and standing seam are at the higher end, while corrugated panels are more budget-friendly. Roof complexity, decking repairs, and gutter replacement all affect the final number. We give free estimates so you can see the breakdown before you commit.
Do I need a permit from the Town of Flower Mound for a metal roof replacement?
Yes, the Town of Flower Mound requires a roofing permit for a full replacement or re-roof, and the requirements vary by project. We handle the permit application and inspections for you. If your home is in a historic district or has HOA design guidelines, we also help coordinate that review. Rules can change, so we always confirm with the local building department before scheduling.
My HOA in Bridlewood has strict design rules. Can you help get a metal roof approved?
We work with Flower Mound HOAs regularly and can provide product samples, color chips, and manufacturer specs for the design review. Some HOAs restrict panel profile or color, so we check the guidelines early. We also respect property lines and setback rules during installation, and we coordinate with neighbors if staging equipment needs to cross a property line.
Are you fully insured for work on my Flower Mound property?
Yes. We carry general liability insurance and workers' compensation coverage for every job. That protects you if anything goes wrong on your property, and it means our crew is covered if someone gets hurt.
What maintenance does a metal roof need in Flower Mound's climate?
Metal roofs are low maintenance, but our hail and wind make annual inspections worthwhile. We check fasteners, seams, and flashing every spring before storm season. After a big hail event, have us look for dented panels or loosened screws. Keeping gutters clear and trimming trees back from the roof also prevents the limb punctures we see often in older neighborhoods with mature pecans and oaks.
Why choose us?

Trusted professionals in Denton

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Denton

All your work handled by qualified professionals in Denton

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

289+ Verified Client Reviews in Denton

⭐⭐⭐⭐⭐ 4.9/5 · 289 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Denton · Response within 24h · No commitment · ☎ (940) 293-2745

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Denton ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm