Serving the Denton area  ·  (940) 293-2745  ·  Open Mon-Sun 7am-7pm
📞 (940) 293-2745 Free Quote

Metal Roofing in Krum, TX (76207) · Local Professionals

Denton Metal Roofing · Fast response in Krum and the Denton area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+289Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Krum is a small town where the prairie meets the Cross Timbers, and most homes sit on generous lots with barns, shops, and outbuildings nearby. The housing stock ranges from older farmhouses and brick ranches to newer builds on the edge of town, many with low-pitched roofs that take a beating from North Texas weather. If you live near Krum High School or along FM 1173, you know how fast a spring storm can roll in off the open fields.

Homeowners in Krum (76207) call Denton Metal Roofing because we understand the local conditions: expansive black clay soil, intense summer UV, and hail that can dent shingles and loosen fasteners. We have worked on properties from the Krum Heritage Museum area to the newer subdivisions off Old Justin Road, and we know what it takes to keep a metal roof tight and quiet through every season.

Metal Roofing in Krum (76207)

Krum sits on the Blackland Prairie where the soil shifts with moisture, and that movement can stress roof decks and flashing over time. Many properties here are farm and ranch setups with corrugated or ribbed panel roofs on barns, shops, and homes, and those panels need regular fastener checks after wind events. The open terrain means wind loads are higher than in town, and hail often comes with the spring storms. We see a lot of screw replacement and re-fastening on older panel roofs, plus leak repairs where flashing has pulled away from chimneys or skylights. For homes with steep gables or complex rooflines, standing seam or stone-coated steel is a popular choice because it handles the weather and looks good from the road.

Our team has been serving Krum and the surrounding Denton County area for years, and we have learned the local building department's permit process and what inspectors look for. Whether it is a small repair on a farmhouse or a full replacement on a newer home, we bring the same attention to detail.

Our services in Krum

How a Job Works in Krum

Step 1: You call us at (940) 293-2745 or request a free estimate online. We schedule an on-site assessment at your convenience, and we will inspect your roof, take measurements, and discuss your options. We will also check for any active leaks or storm damage that needs immediate attention.

Step 2: Once you approve the estimate, we handle the paperwork, including pulling the required permits from the City of Krum. We schedule the work around your timeline and coordinate with any HOA if you live in a neighborhood with design guidelines. On the day of installation, our crew arrives early, protects your landscaping, and works efficiently to minimize disruption. For farm and ranch properties, we are careful with equipment and livestock, and we make sure gates are closed.

Step 3: After the work is done, we do a thorough cleanup, including magnet sweeps for nails and debris. We walk the property with you to make sure you are satisfied, and we provide a warranty on our workmanship. We leave your place clean and your roof ready for the next storm.

Pricing for metal roofing in Krum depends on the size and complexity of your roof, the material you choose, and the condition of the existing structure. For a typical home, metal roof installation starts at $8 per square foot, standing seam at $10, and metal roof replacement at $9. If you are considering a retrofit over existing shingles, that starts at $7 per square foot, but keep in mind that code limits the number of layers. Repairs start at $450, and screw replacement or re-fastening starts at $750. For farm buildings, corrugated and ribbed panel roofing starts at $5.50 per square foot, which is a cost-effective option for barns and shops. We always provide a free estimate so you know exactly what to expect. Call (940) 293-2745 to schedule yours.

My barn near the Krum Fairgrounds has corrugated panels that are loose. Can you re-fasten them without replacing the whole roof?
Yes, we often re-fasten corrugated and ribbed panel roofs on barns and outbuildings. We replace missing or damaged screws with new ones that have neoprene washers, and we check for any panels that need to be resealed or replaced. If the panels are still in good shape, re-fastening can extend the life of the roof for years.
A storm just blew through Krum and lifted some panels on my roof. How quickly can you respond?
We prioritize storm damage calls and can usually get to your property within 24 to 48 hours for an inspection. Call us at (940) 293-2745 and we will schedule a free assessment. If there is an active leak, we can do temporary repairs to prevent further damage until a permanent fix is arranged.
What does a metal roof repair typically cost in Krum?
Most repairs start at $450, which covers common issues like flashing repair, leak diagnosis, and small panel fixes. The final cost depends on the extent of the damage, accessibility, and materials needed. We provide a written estimate before any work begins.
Do I need a permit from the City of Krum for a metal roof replacement?
Yes, the City of Krum requires a permit for roof replacements. We handle the permit application and inspections as part of our service. Requirements can change, so we always verify with the local building department before starting work.
My neighbor and I share a property line, and I want to make sure my new metal roof does not cause drainage issues on their side. What should I do?
We can adjust gutter placement and downspouts to direct water away from the property line. If you are in an HOA, we can also help you get approval for the roof style and color. It is always a good idea to discuss your plans with your neighbor before work begins.
Are you fully insured for work on my property in Krum?
Yes, we carry general liability insurance and workers' compensation coverage. This protects you and your property in case of any accidents during the project.
What maintenance does a metal roof need in Krum's climate?
We recommend an annual inspection, especially after hail season. Check for loose screws, damaged flashing, and debris buildup in gutters. In the fall, clear leaves and branches from the roof and gutters to prevent clogs. A professional inspection can catch small issues before they become leaks.
Why choose us?

Trusted professionals in Denton

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Denton

All your work handled by qualified professionals in Denton

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

289+ Verified Client Reviews in Denton

⭐⭐⭐⭐⭐ 4.9/5 · 289 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Denton · Response within 24h · No commitment · ☎ (940) 293-2745

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Denton ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm