Serving the Denton area  ·  (940) 293-2745  ·  Open Mon-Sun 7am-7pm
📞 (940) 293-2745 Free Quote

Metal Roofing in Highland Village, TX (75077) · Local Professionals

Denton Metal Roofing · Fast response in Highland Village and the Denton area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+289Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Highland Village sits on the south shore of Lewisville Lake, and the housing stock tells the story: mostly 1980s to 2020s brick and stone two-story homes on curving streets with mature oaks, many tucked into neighborhoods like Highland Shores and The Landing. If you live here, you already know the hail that rolls across the lake in spring and the way the summer sun bakes a west-facing roof.

We are Denton Metal Roofing, and we work Highland Village (75077) every week. From the homes near Copperas Branch Park to the stretches along FM 407, we have seen what the lake wind and North Texas storms do to shingles, and we have helped homeowners move to metal roofs that hold up. Call us at (940) 293-2745 when you want a straight answer about your roof.

Metal Roofing in Highland Village (75077)

Highland Village is not flat prairie. The neighborhoods roll with the lake topography, and many lots back up to greenbelts or drainage easements. That means roof access can be tight, and runoff has to be managed carefully so water does not pool against the foundation. The mature oaks that make this city beautiful also drop limbs and fill gutters, and the black clay soil shifts with every wet and dry cycle. We see a lot of homes here with low-pitched roofs over living areas and steeper gables over entries, so we plan panel layout and flashing details around those transitions. Stone-coated steel is a favorite in Highland Village because it matches the brick and stone facades and handles hail better than asphalt shingles, and our gutters for metal roofs are sized to move the volume of water that comes off a metal roof during a North Texas downpour.

Our team has been working Denton County roofs for years, and Highland Village is a regular stop. We know which streets have HOA design review, which neighborhoods have tighter lot lines, and how to schedule a job so it does not sit waiting on a permit. When we give you an estimate, it is based on what we see at your house, not a generic number.

Our services in Highland Village

How a Job Works in Highland Village

Step 1: You call (940) 293-2745 or request a free estimate online. We schedule an on-site assessment at your Highland Village home, usually within a couple of days. We walk the roof, check the attic if accessible, look at flashing and fasteners, and talk with you about what you want: a repair, a full replacement, or a metal roof over your existing shingles. You get a written scope and price before any work starts.

Step 2: Once you approve, we pull the required roofing permit with the City of Highland Village and coordinate any HOA approval if your neighborhood requires it. On installation day, we protect your landscaping and driveway, stage materials so we do not block the street, and keep the crew moving. If your lot has tight access or a steep grade, we plan for that ahead of time so there are no surprises. Most residential metal roofs take several days depending on size and complexity.

Step 3: Cleanup is part of the job. We magnet-sweep the yard and driveway for nails, haul away old materials, and do a final walkthrough with you. We do not consider the job done until you have looked at the roof and the property and signed off. We leave your place clean and your roof ready for the next storm.

Pricing in Highland Village depends on the size and pitch of your roof, the material you choose, and how much prep work is needed. As a ballpark, metal roof installation starts at $8 per square foot, standing seam at $10 per square foot, and metal roof replacement at $9 per square foot. If you want to go over existing shingles, retrofit starts at $7 per square foot, though code limits how many layers you can cover. Repairs and leak fixes start at $450, screw replacement and re-fastening at $750, and flashing or chimney repair at $600. Stone-coated steel and metal shingle roofs both start at $9 per square foot, and copper or specialty metal starts at $20 per square foot. Gutters for metal roofs start at $9 per linear foot. Every roof is different, so call (940) 293-2745 for a free estimate and a real number for your home.

My Highland Village home has a low-pitch roof over the back patio and steeper gables in front. Can you match a metal roof to that?
Yes. That mix of pitches is common in Highland Village, especially in neighborhoods built in the 1990s and 2000s. We use standing seam or stone-coated steel on the steeper sections and a appropriate panel profile on the low-pitch areas, with careful flashing at the transitions so water does not get behind the panels. We will show you the options during the free estimate.
A storm just came through and I have a leak near my chimney. How fast can you get to Highland Village?
We prioritize active leaks. Call (940) 293-2745 and we will schedule an inspection as quickly as possible, often same day or next day depending on storm volume. We can tarp the area if needed and give you a written repair estimate before we start.
What does a typical metal roof cost in Highland Village compared to asphalt shingles?
Metal costs more upfront. For a standard Highland Village home, you are looking at roughly $8 to $10 per square foot for installation, depending on the material, versus a few dollars per square foot for asphalt. But metal lasts longer, reflects heat, and holds up to hail better, so many homeowners here see it as a long-term investment. We give you a free estimate with exact numbers for your roof.
Do I need a permit from the City of Highland Village for a metal roof replacement?
In most cases, yes. A full replacement or re-roof typically requires a roofing permit from the City of Highland Village, and the requirements can vary. We handle the permit application for you and make sure the work meets local code. If your home is in an HOA, there may also be design review for panel profile and color, and we can help you navigate that.
My HOA requires approval for a metal roof. Can you help with that process?
We can. Many Highland Village neighborhoods have architectural review committees, and we are familiar with what they typically ask for: color samples, panel profile, and sometimes a drawing. We provide the documentation you need and can coordinate with your HOA point of contact so the approval does not hold up the job.
Are you insured for work on my Highland Village property?
Yes. We are fully insured, with general liability and workers' compensation coverage.
What maintenance does a metal roof need in Highland Village's climate?
Not much, but a yearly inspection helps. We check fasteners, seals, and flashing, and clear debris from valleys and gutters, especially after spring storms and in the fall when leaves drop. If you have trees close to the roof, keep limbs trimmed back. A quick call to (940) 293-2745 can schedule a maintenance check before storm season.
Why choose us?

Trusted professionals in Denton

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Denton

All your work handled by qualified professionals in Denton

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

289+ Verified Client Reviews in Denton

⭐⭐⭐⭐⭐ 4.9/5 · 289 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Denton · Response within 24h · No commitment · ☎ (940) 293-2745

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Denton ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm