Serving the Denton area  ·  (940) 293-2745  ·  Open Mon-Sun 7am-7pm
📞 (940) 293-2745 Free Quote

Metal Roofing in Argyle, TX (76226) · Local Professionals

Denton Metal Roofing · Fast response in Argyle and the Denton area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+289Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Argyle is the kind of town where a single street can go from a two-acre ranchette to a brand-new brick-and-stone subdivision in a quarter mile. The large lots west of Denton, with their horse barns, shops, and long driveways, sit under the same big prairie sky that hailstorms love to unload on. If you live off FM 407 or near Argyle High School, you already know that a roof here has to handle more than just rain.

Homeowners in 76226 call Denton Metal Roofing because we understand the mix of housing stock here: from older farmhouses that need a retrofit over shingles to new builds with steep gables that are perfect for standing seam. We are based in Denton, just up the road, and we have spent years working on roofs across Argyle and the surrounding county. When a storm rolls through and you need a real answer, our team is the one you want on your property.

Metal Roofing in Argyle (76226)

Argyle sits on the Blackland Prairie and the Cross Timbers edge, which means expansive black clay soil that shifts with every wet and dry cycle. That movement can wreak havoc on roof decks and fasteners if the installation is not done right. We see a lot of large-lot homes and ranchettes west of Denton where the roof pitch is low and the panels are long, and the wind out here has nothing to stop it. We also work on the newer two-story brick-and-stone homes in subdivisions like Argyle Meadows and The Highlands, where HOA rules often dictate panel profile and color. Our team knows how to handle the tight access on some of these lots and the long driveways that need careful staging for materials.

We have been serving Argyle and the greater Denton area for years, and we have seen firsthand how hail, wind, and intense summer sun punish roofs. That is why we recommend standing seam and stone-coated steel for many of the homes here: they shrug off hail and hold their color under the harsh UV. Whether you are on a horse farm near Ponder or in a new development off I-35W, we bring the same level of craftsmanship and local knowledge to every job.

Our services in Argyle

How a Job Works in Argyle

Step 1: You call us at (940) 293-2745 or fill out our contact form, and we schedule a free on-site assessment. We will walk your roof, check for hail damage, lifted panels, or worn fasteners, and talk through your options. You get a written estimate that covers materials, labor, and any permit fees, with no surprises.

Step 2: Once you approve the estimate, we handle the permitting with the Town of Argyle. We know the local requirements and can coordinate with your HOA if needed. On the work day, our crew arrives early, protects your landscaping, and gets to work. For a typical standing seam installation on a 2,000-square-foot home, we can usually finish in two to three days, weather permitting. We use only high-quality fasteners and sealants designed for the Texas climate.

Step 3: After the work is done, we do a thorough cleanup, including a magnet sweep for nails. We walk the roof with you to make sure you are satisfied, and we do not leave until you are. We also provide a final inspection checklist and warranty information. Our goal is to leave your property cleaner than we found it.

Pricing for metal roofing in Argyle depends on the size and complexity of your roof, the material you choose, and the condition of the existing structure. As a ballpark, metal roof installation starts at $8 per square foot, standing seam at $10 per square foot, and metal roof replacement at $9 per square foot. If you are considering a retrofit over existing shingles, that starts at $7 per square foot. For smaller jobs, metal roof repair starts at $450, and screw replacement and re-fastening starts at $750. We also offer metal roof coating and painting from $2.50 per square foot, which can extend the life of an older roof. Every project is different, so call us at (940) 293-2745 for a free estimate tailored to your Argyle home.

My house is on a large lot west of Denton with a low-pitch roof and I get hail regularly. What metal roof do you recommend for Argyle?
For low-pitch roofs on large lots, we often recommend standing seam metal roofing because the panels are long and have hidden fasteners, which reduces leak points. Standing seam also handles hail well, especially when paired with a thicker gauge steel. For a more budget-friendly option, corrugated and ribbed panel roofing is a good choice, but we will assess your roof pitch and exposure to make a specific recommendation. We serve many ranchettes in Argyle and can help you choose the right profile.
A storm just knocked some panels loose on my barn off FM 407. Can you come out today for an emergency repair?
Yes, we offer storm and wind damage repair with free inspections. Call us at (940) 293-2745 and we will schedule a visit as soon as possible. We understand that a loose panel can lead to water damage quickly, so we prioritize emergency calls. Our team will secure the area and provide a permanent fix.
What is the typical cost to replace a metal roof on a 2,500-square-foot home in Argyle?
For a 2,500-square-foot home, a metal roof replacement typically ranges from $22,500 to $30,000 depending on the material and complexity. Standing seam will be on the higher end, while corrugated panels are more economical. We provide free estimates and can break down the costs for your specific roof.
Do I need a permit to install a metal roof in Argyle, and does the town have any special requirements?
Yes, the Town of Argyle requires a permit for roof replacements and some repairs. Requirements vary, so we always verify with the local building department before starting work. We handle the permitting process for you. If your home is in a historic district or HOA, there may be additional design review, and we can help coordinate that.
My neighbor's tree branches hang over my roof, and I want to install a metal roof. How do I handle the property line and HOA approval?
It is best to discuss the overhanging branches with your neighbor before starting work, as you may need to trim them for access. For HOA approval, we can provide documentation and specifications to submit to your HOA board. We are familiar with many Argyle HOAs and can help navigate their requirements.
Are you fully insured for metal roofing work in Argyle?
Yes, we are fully insured with general liability and workers' compensation coverage. This protects you and our crew in case of any accidents on your property.
What maintenance should I do on my metal roof in Argyle to prevent leaks and storm damage?
We recommend an annual inspection, especially after hail season in the spring. Check for loose fasteners, debris in gutters, and any signs of wear around flashing and penetrations. In Argyle, the intense sun can degrade sealants over time, so having a professional inspect and reapply sealant every few years is wise. We offer maintenance plans and free inspections to keep your roof in top shape.
Why choose us?

Trusted professionals in Denton

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Denton

All your work handled by qualified professionals in Denton

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

289+ Verified Client Reviews in Denton

⭐⭐⭐⭐⭐ 4.9/5 · 289 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Denton · Response within 24h · No commitment · ☎ (940) 293-2745

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Denton ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm