Serving the Denton area  ·  (940) 293-2745  ·  Open Mon-Sun 7am-7pm
📞 (940) 293-2745 Free Quote

Metal Roofing in Hickory Creek, TX (75065) · Local Professionals

Denton Metal Roofing · Fast response in Hickory Creek and the Denton area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+289Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Hickory Creek sits right on the edge of Lake Lewisville, where wooded lots and mature pecan and oak trees shade a mix of 1980s brick ranches and newer two-story homes off Swisher Road and Turbeville Road. If your roof is showing its age, we install, repair, and replace metal roofing built for this exact mix of lake humidity, spring hail, and summer sun.

Homeowners in the 75065 ZIP code call Denton Metal Roofing because we know how these wooded lakeside properties shed water, how tree limbs and debris load up valleys and gutters, and how to match a metal roof to the look of a Hickory Creek neighborhood without overbuilding it. We are based in Denton, fully insured, and we treat every Hickory Creek job like it is in our own backyard.

Metal Roofing in Hickory Creek (75065)

Hickory Creek is not a flat, open subdivision. Lots here tend to be larger and heavily wooded, with post oaks, cedar elms, and pecans close enough to drop limbs and shade the roof for much of the day. That shade is nice in July, but it keeps shingles damp longer, hides granule loss, and lets moss and algae get a foothold. The ground is Blackland Prairie clay, which swells and shifts with our wet and dry cycles, so proper flashing at chimneys, skylights, and wall intersections matters more than the panel itself. And because many homes sit on a slope down toward the lake, we pay close attention to where water runs off the roof and how gutters discharge it away from the foundation.

Our team has worked metal roofs across Denton County, from standing seam on lakefront homes to metal-over-shingle retrofits on 1990s brick houses. In Hickory Creek, the jobs we see most are leak repairs around failed fasteners and flashing, and retrofit installations where the existing shingle roof is still sound enough to receive a metal panel system. We know which panel profiles and colors read well from the street here, and we know how to work around tight tree canopies and narrow driveways without tearing up your landscaping.

Our services in Hickory Creek

How a Job Works in Hickory Creek

Step 1: You call (940) 293-2745 or request a free estimate. We schedule an on-site assessment, walk the roof and attic, check flashing, fasteners, and decking, and talk through whether a repair, a retrofit, or a full replacement makes sense for your Hickory Creek home. You get a written scope and price before any work starts.

Step 2: We pull the required roofing permit through the local building department, coordinate any HOA design review if your neighborhood has one, and order materials. On the work day, we protect landscaping and driveways, remove or prep the old roof, and install the new metal system. On wooded lots, we often need to stage materials in the driveway and hand-carry panels to avoid damaging trees and fences, so we plan access carefully.

Step 3: We magnet-sweep the yard, haul away all debris, and walk the finished roof with you. We show you the fasteners, flashing, and gutter connections, and we do not leave until you are satisfied with the cleanup and the workmanship.

Pricing in Hickory Creek depends on roof size, pitch, access, and the condition of the existing roof. As a ballpark, metal roof installation starts at $8 per square foot, standing seam at $10, metal roof replacement at $9, and metal over shingles (retrofit) at $7. Corrugated and ribbed panel roofing starts at $5.50 per square foot, while stone-coated steel and metal shingle systems start at $9. Repairs and leak repairs start at $450, screw replacement and re-fastening at $750, and flashing, chimney, or skylight repair at $600. Coating and painting starts at $2.50 per square foot, and gutters for metal roofs start at $9 per linear foot. Tree cover, steep pitches, and multiple roof planes can add labor, so we give you a firm number after the free inspection. Call (940) 293-2745 to schedule yours.

My Hickory Creek home is surrounded by large oaks and pecans. Does that make a metal roof a better or worse choice?
Better, in most cases. Metal sheds leaves and debris more easily than asphalt, and it does not support moss growth the way aged shingles can. The tradeoff is that falling limbs can dent or puncture any roof, so we inspect tree overhang and recommend trimming back branches that touch or hang within a few feet of the roof.
A storm just took off several panels on my roof near Lake Lewisville. How fast can you get out?
We offer free storm and wind damage inspections in Hickory Creek and the surrounding area. Call (940) 293-2745, and we will schedule an assessment as quickly as possible, document the damage for your insurance claim, and make temporary repairs if the roof is open to the weather.
What does a typical metal roof over shingles cost for a 2,000 square foot house in 75065?
For a simple gable roof in decent condition, a retrofit often lands in the range of $14,000 to $20,000 depending on panel type, roof complexity, and whether any decking repairs are needed. Steep pitches, multiple valleys, and heavy tree cover can push that higher. We confirm the exact price after a free on-site measurement.
Do I need a permit to replace my roof in Hickory Creek, and who handles it?
Roofing permits are commonly required for a full replacement or re-roof, and the rules are set by the local building department. We verify the current requirements with the city before work begins and handle the permit application and inspection scheduling as part of the job.
My HOA has design rules and my neighbor's trees hang over the property line. How do you handle that?
We review your HOA guidelines before ordering panels so the profile and color are approved. For overhanging branches, we do not cut anything without your permission. We can work around the overhang, and if a limb is damaging the roof, we will point it out so you can talk with your neighbor.
Are you insured for roofing work at my Hickory Creek property?
Yes. We carry general liability insurance and workers' compensation coverage.
What maintenance does a metal roof need in Hickory Creek's climate?
Check fasteners and flashing once a year, especially after spring hail season, and keep gutters and valleys clear of leaves from your trees. Snow guards are worth considering on steep north-facing slopes where ice can build up at the eaves during our occasional winter ice storms. A periodic inspection catches small issues before they become leaks.
Why choose us?

Trusted professionals in Denton

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Denton

All your work handled by qualified professionals in Denton

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

289+ Verified Client Reviews in Denton

⭐⭐⭐⭐⭐ 4.9/5 · 289 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Denton · Response within 24h · No commitment · ☎ (940) 293-2745

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Denton ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm